Skip to main content
Automated Governance Systems — AGSDotted globe beside the letters A G S, the AGS brand mark.AGS
Sign InSign Up
SCADA FOR AI · BUILDINGS

SCADA for AI for buildings and campuses

Heating, cooling, ventilation and energy across estates, where small setpoint changes add up and out-of-hours changes need care.

Start with the example plant →Take the readiness check

Example data — illustrative scenario, not a real plant

Example: out-of-hours cooling change

  1. A request to lower the AHU 2 supply-air setpoint is made at 23:00.
  2. The blocked-hours safety limit refuses it and the refusal is written to the audit trail.
  3. In the morning the request is resubmitted, within range, with a reversal step, and approved by the estates manager.
  4. The assistant answers "why was the library warm yesterday?" citing the zone temperature readings and the delayed change.

In every step the AI observes and recommends. Commands still need a named requester, a different approver and a recorded way to reverse them.

Plant map example

City campus › Library › Plant room › Air handling unit 2

Signals typically watched

  • Zone temperatures and CO₂
  • Supply-air setpoints
  • Chiller and boiler status
  • Energy use

Connecting your equipment

Available today: secure HTTPS device connection through a site gateway. OPC UA and MQTT connectors are planned and will only be offered once tested with real equipment.

Register interest

See SCADA for AI on an example buildings scenario

Start with the 30-day sandbox, then compare plans when you're ready to connect real equipment.

Request my trial →Compare plans